Welcome [Wuxi Yi Jin Machinery Co. Ltd.] official website!
Chinese   |   English   |  Sitemap
FRP centrifugal Ventilator

Position:Home > FRP centrifugal Ventilator

  • FRP centrifugal fan

    FRP centrifugal fan

    More+

  • FRP centrifugal fan

    FRP centrifugal fan

    More+

  • FRP centrifugal fan

    FRP centrifugal fan

    More+

  • FRP centrifugal fan

    FRP centrifugal fan

    More+

FRP centrifugal fan installation should be carefully checked before the installation of the fan parts, connectors are damaged, loose and so on, if there is a timely replacement or amendment, in particular, should pay attention to whether the impeller is damaged and polished, leaf and the gap between the hairdryer Uniform, impeller rotation direction is correct. In the use of glass fiber reinforced concrete centrifugal fan should always pay attention to whether the operation is normal, should be timely maintenance, use a period of time should be cleaned, dust, and the oil filling oil lubrication. Installation of the foundation surface shall be flat and shall be 100-200 mm above the roof to prevent seepage and leakage. And should be buried in the joint bolts. Check the fastening nut to ensure fastening and prevent loosening. In case of winter snowy freezing period, you must always start the glass fiber reinforced concrete centrifugal fan, to prevent the snow caught glass fiber reinforced plastic centrifugal fan outlet.
If the fan's anti-condensation performance is poor, the indoor and outdoor temperature difference between the larger, easy to condensation on the hairdryer, resulting in dripping phenomenon, and even affect the normal production. So the fan must have a reliable rain, anti-snow and windbreak of the basic performance, but many fans in the design only consider the rain function, ignoring the snow and sand will not only from the upper into the fan, the outdoor wind speed to a certain Strength of the situation, it may also enter the fan from the lower part. 
Open